CAN and RS485 Keypad Addresses – Assign any valid CAN (J1939) address to the keypad while also assigning the same or a different RS485 address. Communicate on either BUS simultaneously.
CANopen Communications Protocol – Fully compliant with Device P3ofile 401d.
J1939 Address Claim Transmission – Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to
automatically announce its address and accept a new address assignment as appropriate.
Event Status Transmission – The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgments as that of the latching position of a mechanical switch.
Periodic Status Transmission – The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages but can be adjusted in a wide range.
Periodic Heartbeat – The keypad sends a continuous broadcast of messages indicating it is functioning correctly. The frequency of these messages but can be adjusted in a wide range.
The PowerTrack keypad and its rotary encoder were both designed by Blink Marine as a natural evolution of the Powerkey 1000, from which it has inhe...
View full details
PowerKey1000 is the flagship model for Blink Marine’s IP67 keypads. It boasts 10 keys and is available with CANopen and J1939 protocols. Compact an...
View full details
PowerKey1400 is the flagship model for Blink Marine’s IP67 keypads. It boasts 14 keys and is available with CANopen and J1939 protocols. Compact an...
View full details
PKP-2200-SI is a compact 4 position keypad based on CAN protocol. It comes equipped with four keys with interchangeable 15 mm inserts. The keypad i...
View full details
PKP-2300-SI is a compact 6 position keypad based on CAN protocol. It comes equipped with four keys with interchangeable 15 mm inserts. The keypad i...
View full details
PKP-2400-SI is a compact 8 position keypad based on CAN protocol. It comes equipped with four keys with interchangeable 15 mm inserts. The keypad i...
View full details
PKP-2400-SI is a compact 12position keypad based on CAN protocol. It comes equipped with four keys with interchangeable 15 mm inserts. The keypad i...
View full details
PKP-2200-LI is a compact 4 position keypad based on CAN protocol. It comes equipped with four keys with interchangeable 24 mm inserts. The keypad i...
View full details
PKP-2400-LI is a compact 8 position keypad based on CAN protocol. It comes equipped with four keys with interchangeable 24 mm inserts. The keypad i...
View full details
